TH型环链斗式提升机
TH型斗式提升机产品概述
TH系列斗式提升机适用于输送粉状、粒状及小块状的无磨琢及磨琢性小的物料。TH型是一种圆环链斗式提升机采用混合式或重力卸料,挖取式装料。牵引件用优质合金钢高度圆环链。中部机壳分单、双通道两种形式为机内重锤箱恒力自动张紧。链轮采用可换轮缘组合式结构。使用寿命长,轮缘更换工作简便。下部采用重力自动张紧装置,能保持恒定的张紧力,避免打滑或脱链,同时料斗遇到偶然因素引起的卡壳现象时有一定的容让性,能够有效地保护下部轴等部件。该斗式提升机适用于输送堆积密度小于1.5t/m3易于掏取的粉状、粒状、小块状的底磨琢性物料。如煤、水泥、碎石、砂子、化肥、粮食等。TH型斗式提升机用于各种散状物料的垂直输送。适用于输送粉状、粒状、小块状物料,物料温度在250℃以下。
本机备有二种料斗:ZH型(中深斗)一般适用于输送湿的、易结块、较难抛出的物料,如湿砂、型砂、化肥、碱肥、碱粉等。SH型(深斗)一般适用于输送干燥的、松散易于抛出的物料,如水泥、碎石、煤块等。
本机传动装置有二种形式,分别配有ZJ型减速器和ZQ型减速器。ZJ型轴装减速器直接套装在主轴轴头上,省去了传动平台,联轴器等,使结构紧凑、重量轻、而且内部带有异型辊逆止器,逆止可靠,该减速器噪声低,运转平稳,并随主轴浮动,可消除安装应力。本机最大输送量365m3/h,最大提升高度为50m。
Product overview
TH series bucket elevator is suitable for conveying powder, granulated and small lump without cut and grinding cut small material.TH type is a kind of round link chain bucket elevator adopt the hybrid or gravity discharge, harvest type charging.Traction chain with high quality alloy steel high circle.Central casing of single and double channel within a machine two forms of heavy hammer tank automatic tension constant force.Sprocket using renewable rim composite structure.Long service life and easy rim change of jobs.Gravity automatic tensioning device for the bottom, can keep constant tension and avoid skid or take off the chain, hopper at the same time meet the stuck phenomenon caused by the accidental factors have certain let sex, can effectively protect the lower shaft parts, etc.The bucket elevator is suitable for conveying bulk density is less than 1.5 t/m3 is easy to take out the powder, granulated and small lump materials at the bottom of the grinding cut.Such as coal, cement, gravel, sand, fertilizer, food, etc.TH type bucket elevator used for vertical transportation of various kinds of material.Suitable for conveying powder, granular, small block material, material temperature below 250 ℃.
The machine drive has two forms, one is equipped with what ZJ had type reducer and ZQ type gear reducer.Reducer directly suit with what ZJ had type shaft in main shaft head, eliminating the transmission platform, coupling, etc., make the internal with compact structure, light weight, and different roller non-return device, non-return is reliable, the reducer low noise, smooth operation, and with the main shaft floating, can eliminate stress.The machine maximum throughput of 365 m3 / h, the biggest hoisting height is 50 m.
斗式提升机现场图片
Working site
TH型斗式提升机主要特点
1.维护方便,寿命长。
2.机壳钢板加厚、刚性好。
3.输送物料的温度最高可达250℃。
4.中节机壳具有单通道和双通道两种形式。
5.提升高度运行平稳可靠,噪音小,维护方便。
6.改进机型的提升输送量比普通机型提高30%以上。
7.提升机环链采用低合金钢锻造,并经渗碳淬火处理,具有极高的抗拉强度和耐磨性能。
Features
1. Easy maintenance, long service life.
2. The chassis plate thickening, good rigidity.
3. The conveying material temperature up to 250 ℃.
Section 4. In the case with a single channel and dual channel two forms.
5. Hoisting height stable and reliable operation, low noise, easy maintenance.
6. Improve models improve throughput is 30% greater than normal models.
7. Hoist chain using low alloy steel forging, and after carburizing and quenching processes, and have high tensile strength and wear resistance.
TH型环链斗式提升机链条结构图
The chain Structures
TH型斗式提升机技术参数表
Parameters
型 号 | TH160 | TH250 | TH315 | TH400 | TH500 | TH630 | TH800 | TH1000 | TH1250 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
料斗型式 | zh | sh | zh | sh | zh | sh | zh | sh | zh | sh | zh | sh | zh | sh | zh | sh | zh | sh | |
输送能力,m 3 /h | 19 | 30 | 30 | 48 | 35 | 59 | 58 | 94 | 73 | 118 | 114 | 185 | 150 | 240 | 240 | 360 | 360 | 540 | |
料斗 | 料斗容量(l) | 1.2 | 1.9 | 3 | 4.8 | 3.75 | 6 | 5.9 | 9.5 | 9.3 | 15 | 14.6 | 23.6 | 24 | 38 | 38 | 60 | 60 | 95 |
斗距(mm) | 350 | 450 | 512 | 688 | 936 | 936 | 1001 | ||||||||||||
链条 | 园钢直径 x节(mm) | φ12X45 | φ18X64 | φ22X86 | φ24X86 | φ24X86 | φ28X92 | ||||||||||||
单链条破 断强(KN) | ≥170 | ≥320 | ≥480 | ≥560 | ≥560 | ≥660 | |||||||||||||
料斗运动 速度 (m/s) | 1.3 | 1.2 | 1.4 | 1.5 | 1.6 | 1.6 | 1.6 | ||||||||||||
传动链轮转数 (r/min) | 62.5 | 46.8 | 42.5 | 37.6 | 35.8 | 31.8 | 30.5 | 30.5 | 28 | ||||||||||
输送物料的 最大块度(mm) | 20 | 25 | 35 | 40 | 50 | 60 | 75 | 85 | 100 |
注释:上表为TH型160、200、250型斗式提升机技术参数表,表中料斗容积为盛水容积,输送量按此斗容计算时为100%填充。
1.表中斗容为计算斗容,输送量按填充系数0.6计算得出。
2.TH型斗提机料斗用途:
Zh--中深斗:输送湿粘性物料,如糖、湿细沙等。
Sh--深斗:输送重的粉状至小块状物料,如水泥、砂、煤等。
3.HL型斗提机料斗用途:
Q--浅园底料斗:输送潮湿、易结块、难抛出的物料,如湿沙、湿煤等。
S--深园底料斗:输送干燥的、松散的、易抛出的物料,如水泥、煤块、碎石等。
4.张紧力计算:
G=40+0.232·H
式中:Q--输送量(t/h) H--提升高度(mm) G--张紧力(kg)
Note: the above type TH 160, 200, 250 type bucket elevator technology parameter table, it in the hopper volume as the water volume, throughput in this bucket volume calculation of 100% fill.
In the table 1. The bucket volume to calculate the bucket volume, throughput calculated according to the filling coefficient of 0.6.
2. TH type hopper bucket machine use:
Useful in deep bucket: transport, wet sticky materials such as sugar, wet sand, etc.
Sh - deep bucket: transport, heavy powder to small block materials such as cement, sand, coal, etc.
3. The HL type hopper bucket machine use:
Q - shallow garden at the bottom of hopper: transporting materials in damp, easy to agglomerate, difficult to throw, such as wet sand, wet coal, etc.
S - deep bottom of the garden hopper: conveying dry, loose, easy to throw materials, such as cement, coal, gravel, etc.
4. The tension calculation:
H. G = 40 + 0.232
Type: Q - throughput (t/h) h - hoisting height (mm) G - tension (kg)
型号规格 | YY型驱动装置 | YY型驱动装置 | ||||||
---|---|---|---|---|---|---|---|---|
C1 | C2 | C3 | C4 | C1 | C2 | C3 | C4 | |
TH315 | Y5Y125 | Y7Y140 | Y11Y160 | Y15Y180 | Y5J4 | Y7J4 | Y11J5 | Y15J5 |
TH400 | Y11Y160 | Y15Y180 | Y18Y180 | Y22Y200 | Y11J5 | Y15J6 | Y18J6 | Y55J6 |
TH500 | Y15Y180 | Y18Y200 | Y22Y200 | Y30Y224 | Y15J6 | Y18J6 | Y22J6 | ? |
TH630 | Y18Y200 | Y22Y224 | Y30Y224 | Y37Y250 | Y18J6 | Y22J6 | ? | ? |
说明:Y5Y125表示Y型电机功率为5.5KW,ZLY125型减速机。
Y11J5表示Y型电机功率11KW,JZQ500型减速机。
Description: Y5Y125 show Y type motor power is 5.5 KW, ZLY125 type reducer.
Y11J5 show Y type 11 kw motor power, JZQ500 type reducer.