TD型斗式提升机
TD type bucket elevator is my factory developed based on the D type bucket elevator and into a new type of bucket elevator products, compared with the D type bucket elevator, with specifications, large throughput, high hoisting height, stable operation and reliable, long life and other significant advantages.Its main technical performance and parameters accord with JB3926-85 < < vertical bucket elevator > > (the standard equivalent, with reference to the international standards and advanced foreign standards).
TD系列斗式提升机产品概述
TD系列斗式提升机适用于垂直输送堆积密度不大于1.5t/m3的粉状、粒状、及小块状的磨琢性较小的散状物料,如粮食、煤、水泥、碎矿石等,提升高度最高40m。TD系列斗式提升机严格按照JB3926-85《垂直斗式提升机》标准设计制造,目前国内常用的斗式提升机均为垂直式。TD系列斗式提升机特点为:结构简单,运行平稳,挖取式装料,离心重力式卸料,物料温度不超过60℃;TD系列斗式提升机与传统D型斗式提升机相比输送效率高、料斗形式多,应优先选用。本机备有四种料斗:Q型(浅斗)、H型(弧底斗)、zh型(中深斗)、sh型(深斗),分别输送各种物料,用户可以根据物料特性来选择适当的料斗。本提升机代号为TD,即带式斗式提升机;产品规格以斗宽表示。
Product overview
TD series bucket elevator is suitable for the vertical transport of bulk density is not greater than 1.5 t/m3 powder, granulated and small lump of grinding cut less material, such as grain, coal, cement, crushed ore, hoisting height to 40 m.TD series bucket elevator in strict accordance with the JB3926-85 standard design and manufacture of vertical bucket elevator, the current domestic common bucket elevator are vertical.TD series bucket elevator features: simple structure, smooth operation, harvest type charging, centrifugal gravity discharge, the material temperature less than 60 ℃;TD series bucket elevator compared with the traditional D type bucket elevator, hopper, high transmission efficiency should be preferable.This machine is equipped with four hopper: Q type (light pipe), H (arc bottom bucket), zh (in a deep bucket), sh (deep), conveying a variety of materials, respectively, a user can choose according to material features of appropriate hopper.This elevator codes for TD, the belt bucket elevator;Product specifications to dou wide said.
斗式提升机料斗和皮带
斗式提升机现场图片
Working site
TD系列斗式提升机基本结构
TD型斗式提升机由运行部分(料斗与牵引胶带),带有传动滚筒的上部区段,带有拉紧滚筒的下部区段,中间机壳,驱动装置,逆止制动装置等组成。适用于向上输送松散密度ρ<1.5t/m3粉状、粒状和小块状的无磨琢性和半磨琢性散状物料,如煤、砂、焦末、水泥、碎矿石等。TD型斗式提升机结构形式为:TD型斗提升机的传动装置有两种形式,分别配有YZ型减速器、ZQ(或YY)型减速器。YZ型轴减速器直接装在主轴轴头上,省去了传动平台、联轴器等,使结构紧凑、重量轻,而且其内部带有异型辊逆止器,逆止可靠。该减速器噪音低,运转平稳,并随主轴浮动,可消除安装应力。Structures
TD type bucket elevator by running parts (hopper and traction tape), with the upper section of the drive roller, with the lower section of the idler pulley, intermediate casing, device drivers, non-return brake equipment, etc.Suitable for the upward transportation loose density < 1.5 t/m3 powder, granulated and small lump without grinding cut and half cut grinding, loose materials such as coal, sand, coke, cement, at the end of the crushed ore, etc.TD type bucket elevator structure form is: TD type bucket elevator drive has two forms, respectively with YZ type gear reducer, ZQ (YY) or type gear reducer.YZ type shaft reducer directly mounted on the spindle shaft head, eliminating the transmission platform, coupling, etc., the compact structure, light weight, and its internal with different roll non-return device, non-return and reliable.The reducer low noise, smooth operation, and with the main shaft floating, can eliminate stress.
TD160斗式提升机机头
Head
TD250斗式提升机机头
Head
TD系列斗式提升机主要特点
1.提升范围广,这类提升机对物料的种类、特性要求少,不但能提升一般粉状、小颗粒状物料,而且可提升磨琢性较大的物料.密封性好,环境污染少。2. 驱动功率小,采用流入式喂料、诱导式卸料、大容量的料斗密集型布置.在物料提升时几乎无回料和挖料现象,因此无效功率少。
3.使用寿命长,提升机的喂料采取流入式,无需用斗挖料,材料之间很少发生挤压和碰撞现象。本机在设计时保证物料在喂料、卸料时少有撒落,减少了机械磨损。
4. 运行可靠性好,先进的设计原理和加工方法,保证了整机运行的可靠性,无故障时间超过2万小时。提升高度高.提升机运行平稳,因此可达到较高的提升高度。
Features
1. Ascension is wide, this kind of elevator less kinds, characteristics of the material requirements, not only can improve the general powder, small granular materials, and can improve grinding cut larger material. Good sealing, less environmental pollution.
2. Driving power is small, use of feeding, induction of inflow discharge, large capacity of hopper intensive layout. In material ascends almost no back and dig material phenomenon, therefore less reactive power.
3. The service life is long, hoist feed take into the type, without using bucket digging of material, the material between the extrusion and collision occur rarely.The machine when the design to ensure material few scattered when feeding, discharging, reduce the mechanical wear and tear.
4. Good reliability, advanced design principle and processing method, ensure the reliability of the machine running, trouble-free time more than 20000 hours.High hoisting height. Hoist running smoothly, thus can achieve high hoisting height.
TD-D型斗式提升机安装尺寸
Installation dimensions
TD系列斗式提升机技术参数表
Parameters型号 | TD160 | TD250 | TD315 | TD400 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
料斗形式 | Q | h | zD | Sd | Q | h | zD | Sd | Q | h | zD | Sd | Q | h | zD | Sd |
输送量(m3/h) | 5.4 | 9.6 | 9.6 | 16 | 12 | 22 | 23 | 35 | 17 | 30 | 25 | 40 | 24 | 46 | 41 | 66 |
斗宽(mm) | 160 | 250 | 315 | 400 | ||||||||||||
斗容(L) | 0.5 | 0.9 | 4.2 | 1.9 | 1.3 | 2.2 | 3.0 | 4.6 | 2 | 3.6 | 3.8 | 5.8 | 3.1 | 5.6 | 5.9 | 9.4 |
斗距(mm) | 280 | 350 | 360 | 450 | 400 | 500 | 480 | 560 | ||||||||
带宽(mm) | 200 | 300 | 400 | 500 | ||||||||||||
斗速(m/s) | 1.4 | 1.6 | 1.6 | 1.8 | ||||||||||||
物料量大块(mm) | 25 | 35 | 45 | 55 | ||||||||||||
型号 | TD500 | TD630 | TD160 | TD250 | TD350 | TD450 | ||||||||||
料斗形式 | Q | h | zD | Sd | h | zD | Sd | Q | S | Q | S | Q | S | Q | S | |
输送量(m3/h) | 38 | 70 | 58 | 92 | 85 | 89 | 142 | 4.7 | 8 | 18 | 22 | 25 | 42 | 50 | 72 | |
斗宽(mm) | 500 | 630 | 160 | 250 | 350 | 450 | ||||||||||
斗容(L) | 4.8 | 9 | 9.3 | 15 | 14 | 14.6 | 23.5 | 0.65 | 1.1 | 2.6 | 3.2 | 7 | 7.8 | 14.5 | 15 | |
斗距(mm) | 500 | 625 | 710 | 300 | 400 | 500 | 640 | |||||||||
带宽(mm) | 600 | 700 | 200 | 300 | 400 | 500 | ||||||||||
斗速(m/s) | 1.8 | 2 | 1 | 1.25 | 1.25 | 1.25 | ||||||||||
物料量大块(mm) | 60 | 70 | 25 | 35 | 45 | 55 |
说明:1.表中斗容为计算斗容,输送量按填充系数0.6计算得出。
2.斗提机料斗用途为:浅料斗:输送潮湿、易结块、难抛出的物料。如湿沙、湿煤等。
深料斗:输送干燥的、松散的、易抛出的物料。如水泥、煤块、碎石、石英砂等。
Description:
1. Bucket volume in the table to calculate the bucket volume, throughput calculated according to the filling coefficient of 0.6.
2. The bucket machine hopper purpose is: shallow hopper: transporting materials in damp, easy to agglomerate, difficult to throw.Such as wet sand, wet coal, etc.
Deep hopper: conveying dry, loose materials, easy to throw.Such as cement, coal, gravel, quartz sand, etc.
传动装置技术规范表
Transmission device specifications
提升机 规格 |
传动装置 型 号 |
电动机功率 (KW) |
电 动 机 型号 |
ZQ 减速机型号 | |
---|---|---|---|---|---|
右装传动装置 | 左装传动装置 | ||||
TD100 | C1 | 1.5 | Y100L-6 | 250-Ⅵ-3Z | 250-Ⅵ-4Z |
C2 | 2.2 | Y112M-6 | |||
TD160 | C1 | 3 | Y132S-6 | 350-Ⅵ-3Z | 350-Ⅵ-4Z |
C2 | 4 | Y132M1-6 | |||
C3 | 5.5 | Y132M2-6 | 400-Ⅵ-3Z | 400-Ⅵ-4Z | |
C4 | 7.5 | Y160M-6 | |||
TD250 | C1 | 5.5 | Y132M2-6 | 400-Ⅵ-3Z | 400-Ⅵ-4Z |
C2 | 7.5 | Y160M-6 | |||
C3 | 11 | Y160L-6 | 500-Ⅵ-3Z | 500-Ⅵ-4Z | |
C4 | 15 | Y180L-6 | |||
TD315 | C1 | 7.5 | Y160M-6 | 400-Ⅵ-3Z | 400-Ⅵ-4Z |
C2 | 11 | Y160L-6 | 500-Ⅵ-3Z | 500-Ⅵ-4Z | |
C3 | 15 | Y180L-6 | |||
C4 | 18.5 | Y200L1-6 | 650-Ⅵ-3Z | 650-Ⅵ-4Z | |
TD400 | C1 | 15 | Y180L-6 | 500-Ⅵ-3Z | 500-Ⅵ-4Z |
C2 | 18.5 | Y200L1-6 | 650-Ⅵ-3Z | 650-Ⅵ-4Z | |
C3 | 22 | Y200L2-6 | |||
C4 | 30 | Y225M-6 | |||
TD500 | C1 | 18.5 | Y200L1-6 | 650-Ⅵ-3Z | 650-Ⅵ-4Z |
C2 | 22 | Y200L2-6 | |||
C3 | 30 | Y225M-6 | |||
C4 | |||||
TD630 | C1 | 22 | Y200L2-6 | 650-Ⅵ-3Z | 650-Ⅵ-4Z |
C2 | 30 | Y225M-6 |
斗式提升机种类分类:
斗式提升机作为一种常用的提升设备,在得到广泛的应用的同时,根据不同行业的要求也有着非常清楚的分类,其按照传动结构可以分为:
(1).TD系列斗式提升机
TD系列斗式提升机是一种国家标准的斗式提升机,该系列斗式提升机和D系列斗式提升机都是采用的胶带传动来提升物料,两者没有本质的区别,D系列斗式提升机产品型号较老且型号规格少。TD系列斗式提升机是在D系列斗式提升机的基础上经过产品改良而来,其规格有TD100(不常用)、TD160、TD250、TD315、TD400、TD500、TD630、TD800、TD1000等型号,其中TD160、TD250、TD315等型号为普遍采用型号.
(2).TH系列斗式提升机
TH系列斗式提升机是一种常用的提升设备,该系列斗式提升机采用锻造环链作为传动部分,具有很强的机械强度,主要用于提升粉体和小颗粒及小块状物料。区别于TD系列斗式提升机,其提升量更大、运转效率更高。其常用于较大比重的物料的提升。
(3).NE系列斗式提升机
NE系列斗式提升机是一种新型的斗式提升机,其采用板链传动,区别于老型号TB系列板链斗式提升机,其命名方式采用提升量而命名而非斗宽。如NE150指的是提升量为150吨一小时而不是斗宽150。NE系列斗式提升机有着很高的提升效率,根据提升速度不同还分有NSE型号及高速板链斗式提升机。
(4).TB系列斗式提升机
TB系列斗式提升机是一种较老型号的斗式提升机,其传动部分采用板链传动,现已经被相应NE系列斗式提升机产品替代。
(5).TG系列斗式提升机
TG系列斗式提升机是一种加强型胶带斗式提升机,其区别于TD系列斗式提升机,TG系列斗式提升机采用钢丝胶带作为传动带,其具有更强的传动能力。该系列斗式提升机多被应用于粮食输送上,又被称呼为粮食专用斗式提升机。
(6).其它型号斗式提升机
常见的斗式提升机型号还有HL系列斗式提升机、GTD系列斗式提升机、GTH系列斗式提升机等,其均为以上型号的不同叫法和演变形式。
Kinds of classification
Bucket elevator, as a commonly used lifting equipment, widely used at the same time, according to the requirements of different industries have a very clear classification, according to the transmission structure can be divided into:
(1). TD series bucket elevator
TD series bucket elevator is a kind of national standard of bucket elevator, the series bucket elevator and D series bucket elevator are the tape drive to improve material, no essential difference between the two, D series bucket elevator product model relatively less old and specifications.TD series bucket elevator is on the basis of the D series bucket elevator after product improvement, and its specifications have TD100 (not used), TD160, TD250, TD315, TD400, TD500, TD630, TD800, TD1000 models, including TD160, TD250, TD315 model for the widely used model.
(2). TH series bucket elevator
TH series bucket elevator is a commonly used lifting equipment, the series bucket elevator forged ring chain as the driving part, has a strong mechanical strength, mainly used for lifting powder and small particles and small block material.Differed from TD series bucket elevator, the lifting capacity is bigger, more efficient operation.The materials used to a bigger improvement.
(3). NE series bucket elevator
NE series bucket elevator is a new type of bucket elevator, it USES the plate chain, different from the old models TB series plate chain bucket elevator, named after its naming USES lifting capacity, rather than fight wide.Such as NE150 refers to the lifting capacity of 150 tons a sometimes not fight 150 wide.NE series bucket elevator has a high efficiency, according to the speed of different points are also NSE model and high-speed plate chain bucket elevator.
(4). The TB series bucket elevator
TB series bucket elevator is a kind of older types of bucket elevator and its transmission part adopts plate chain, now replaced by corresponding NE series bucket elevator products.
(5). TG series bucket elevator
TG series bucket elevator is a kind of reinforced belt bucket elevator, the difference in the TD series bucket elevator, TG series bucket elevator adopts steel wire adhesive tape as a transmission belt, it has stronger ability of transmission.This series bucket elevator is more applied in food delivery, and called for food special bucket elevator.
(6). Other types of bucket elevator
Common bucket elevator model number and the HL series bucket elevator, GTD series bucket elevator, GTH series bucket elevator, etc., and its form are the above model and different way of evolution.
我公司可根据用户需要设计制造特殊型号规格的斗式提升机。
我公司对所有技术资料、尺寸保留修改的权利,如实物与文中图案不符,应以实物为准。
Our company can design and manufacture according to user needs special specifications of bucket elevator.
My company for all technical data, reserve the right to modify the size, such as material object does not accord with the design, the material shall prevail.