LS型螺旋输送机

LS螺旋输送机产品概述

    螺旋输送机广泛应用于建材、冶金、化工、电力、煤炭、机械、轻工、粮食及食品行业，适宜输送粉状、颗粒状、小块状物料，如水泥、煤粉、粮食、化肥、灰渣、沙子、焦炭等；不宜输送易变质、粘性大、易结块的物料。螺旋输送机工作环境温度通常为-20～40℃，输送物料的温度一般为-20～80℃，螺旋输送机适宜水平和小倾角布置，倾角以不超过15°为宜，如倾斜角度过大请选用GX系列螺旋输送机，或与我公司技术部门联系进行单独设计。
    LS型螺旋输送机等效采用ISO1050-75标准，设计制造符合ZBJ81005.1～2-88《 LS螺旋输送机 》专业标准。LS型螺旋输送机直径由100mm～1250mm，共十二种规格,分为单驱动和双驱动两种形式，单驱动螺旋输送机最大长度可达40m(特大型30m)，双驱动螺旋输送机采用中间断开轴结构，最大长度可达80m(特大型60m)，螺旋输送机长度级差每0.5m一档，可根据需要选定，螺旋输送机头部轴承、尾部轴承置于壳体外部减少了灰尘对轴承室的侵入提高了螺旋机关键件的使用寿命。中间吊轴承采用滚动、滑动可互换的两种结构，阻力小、密封性强、耐磨性好。滑动轴承的轴瓦有粉末冶金、尼龙和巴氏合金等多种材料供用户根据不同的场合选用。吊轴承机外侧置式油杯,便于集中加油润滑。进出料口位置布置灵活,并增设电动型出料口，便于自动控制，还可根据用户要求，配置测速报警装置。

Product overview
   Screw conveyor is widely used in building material, metallurgy, chemical industry, electric power, coal, machinery, light industry, food and the food industry, is suitable for conveying powder, granulated and small lump materials, such as cement, coal, grain, chemical fertilizer, ash, sand, coke, etc.;Should not be transporting perishable materials, big viscosity, easy to agglomerate.Screw conveyor working environment temperature is usually - 20 ~ 40 ℃, the temperature of the conveying material is commonly - 20 ~ 80 ℃, screw conveyor is suitable for level and layout of the small Angle, inclination Angle with no more than 15 ° advisable, such as the Angle is too large, please choose GX series screw conveyor, or contact our technical department to design alone.

Type LS screw conveyor equivalent made ISO1050-75 standard, design and manufacture accord with ZBJ81005.1 ~ 2-88 LS screw conveyor professional standards.Type LS screw conveyor diameter from 100 mm to 1250 mm, a total of 12 kinds of specifications, can be divided into single and double drive two forms, single drive screw conveyor maximum length can reach 40 m (oversize 30 m), double drive screw conveyor with middle shaft structure, the maximum length of 80 m (oversize 60 m), the length of the screw conveyor differential every 0.5 m a, can choose according to need, screw conveyor head bearing, the tail bearing under the external reduce dust to the invasion of the bearing chamber improves the service life of screw machine key-module.Suspension bearing adopts rolling, sliding interchangeable among two kinds of structure, small resistance, sealing strong, good wear resistance.Sliding bearing shell powder metallurgy, nylon and babbitt and so on the many kinds of material selection for user according to different occasions.Lateral suspension bearing machine type oil cup, to facilitate centralized lubrication.Front-rear mouth position arranged flexibly, and adding type electric discharging mouth, convenient automatic control, can also according to user requirements, speed alarm device.

LS螺旋输送机现场图片

Pictures

LS螺旋输送机工作特点

1、承载能力大、安全可靠。
2、适应性强、安装维修方便、寿命长。
3、整机体积小、转速高、确保快速均匀输送。
4、密封性好、外壳采用无缝钢管制作，端部采用法兰互相连接成一体，刚性好。

Features
1, large carrying capacity, safe and reliable.
2, strong adaptability, easy installation and maintenance, long service life.
3, the machine is small in size, high speed, ensure rapid delivery uniformity.
4, good sealing, shell made of seamless steel tube end use flange connection each other as a body, good rigidity.

LS螺旋输送机产品特点

1、高效率的输送：小直径、高转速、变螺距的螺旋体设计，确保产品在工作过程中顺畅、快速、均匀上料。
2、随意的布置：输送机的外壳采用优质无缝钢管通过法兰各段连接为整体，整体刚性好，无论是水平，还是大倾角均可连续输送，并可直接与其配套的设备连接固定，无需地基基础，充分利用空间，移动、拆装十分方便。
3、可靠的密封：润滑密封可靠无渗漏，既无浪费物料现象，又创造了良好的工作环境。
4、多元化的联接：进、出料口可采用万向节、布袋、法兰联接方式，还可与我厂生产的蝶阀、插板阀组合联接。
5、创新的设计：先进合理的设计，结合先进制造工艺和完善的质量保证体系，使其具有体积小，承载转矩大、噪音低、不渗油等显著优点。

Characteristic
1, high efficiency of delivery: small diameter, high speed, varying pitch helix design, ensure that the product in the process of work smooth, rapid and uniform loading.
2, random arrangement: conveyor of the shell is made of high quality seamless steel tube by flange for whole paragraphs connection, rigid good, the whole level, or can be continuous transmission of large dip Angle, and can be connected directly with matching equipment fixed, without foundation, make full use of space, mobile, tear open outfit is very convenient.
3, reliable sealing, lubrication reliable sealing with no leakage, no waste of materials, and created a good working environment.
4, diversified connection: inlet and discharging mouth can use universal joint, bag, flange connection, but also with our factory production of butterfly valve, flashboard valve combination connection.
5, innovative design, advanced and reasonable design, combined with advanced manufacturing technology and perfect quality assurance system, make it has small volume, carrying large torque, low noise, low permeability oil etc.

LS螺旋输送机结构图

ls螺旋输送机技术参数

LS螺旋输送机外形尺寸图

Structures

LS螺旋输送机进出料口尺寸图

Feed port and discharge port

★我公司可根据用户需要设计制造特殊型号规格的输送机。
★我公司对所有技术资料、尺寸保留修改的权利，如实物与文中图案不符，应以实物为准。
友情提示:螺旋输送机不宜输送易变质的、粘性大的、易结块的物料，因为这些物料在输送时会粘结在螺旋上，并随之旋转而不向前移动或者在吊轴承处形成物料的积塞，而使螺旋机不能正常工作。LS型螺旋机螺旋直径从200毫米到500毫米，共有五种规格，长度从4米到70米，每隔0.5米一档，选型时符合标准公称长度，特殊需要可在选配节中另行提出。

★ My company can design and manufacture according to user needs special specifications of the conveyor.
★ For all my company reserves the right to modify technical data, size, such as material object does not accord with the design, the material shall prevail.
Helpful hints: screw conveyor is unfavorable and transportation of perishable materials, big viscosity, easy to agglomerate, because these materials in the transmission will be binding on the screw, and then rotate and does not move forward or in suspension bearing formation material product plug, and make the screw machine can't work normally.LS screw machine screw diameter from 200 mm to 500 mm, with a total of five kinds of specifications, the length from 4 meters to 70 meters, one every 0.5 meters, conform to the standard model selection of the nominal length, special needs can be separately in the matching section is put forward.